Configure Layer 2 Trusted Auto-sense Ports

About this task

Perform this procedure to override incoming 802.1p bits on ports that operate in Auto-sense UNI or voice mode.

Procedure

  1. Enter Global Configuration mode:

    enable

    configure terminal

  2. Configure Auto-sense ports as Layer 2 untrusted:

    auto-sense qos 802.1p-override

Example

Configure Auto-sense ports as Layer 2 trusted:

Switch:1>enable
Switch:1#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Switch:1(config)#auto-sense qos 802.1p-override